Integrated Hydraulics閥門1CE30F35S2原理
更新時間：2018-06-13 點擊次數：2301次
Integrated Hydraulics閥門1CE30F35S2原理
美國伊頓集成液壓系統1CE30F35S10
406AA00006A說明：
伊頓：筒式平衡閥。集成
液壓1CE30系列 - 達到5000 PSI和8 GPM。集成
液壓1CE30系列1CE30F35S10
制造商= EATON VICKERS;說明=平衡
閥門（偏心閥），集裝式，集成式
液壓1CE30系列，5075 PSI，8 GPM;特點=
1CE30是一個3端口，外部先導，旋入式
墨盒式平衡（偏心）閥。需要一個
用于安裝的A6610腔體或外殼。
應用=控制移動的負載并防止負載
失控，使載荷保持和軟管失效安全。飛行員
比率= 2.5：1 - 適合極不穩定
諸如長臂架或靈活框架之類的應用。 5:1
- （標準）適合負載不同的應用
機器結構會引起不穩定。 10：1 -
適用于負載相對較小的應用
不變。;規格= 8 gpm額定流量。大4000 psi
負載感應壓力，5000psi大安全壓力。
小心：壓力超過3000磅/平方英寸需要鋼制外殼。
工作溫度范圍=-22 至+194 F;大
內部泄漏=每分鐘5滴（基于油
溫度104°F和150 SSU）。推薦的過濾
等級= ISO等級18/13或更高。安裝= 33英尺 - 磅
將轉矩盒轉入腔體中。無限制的安裝
位置。;外殼：單閥和雙閥外殼
可用的;流量（gpm）= 8;壓力范圍（psi）=
1740-5075，出廠設置= 3045 PSI;導頻比= 10：1;
調整手段=帶鎖緊螺母的螺絲;密封材料=
;注=帶SAE-6的單閥體（鋁）
端口是410AA00014A;重量（磅）= 0.40
Integrated Hydraulics閥門1CE30F35S2原理
 | | Part # 406AA00006A | | EATON INTEGRATED HYDRAULICS 1CE30F35S10 | | | 406AA00006A description:
Eaton: Cartridge Type Counterbalance Valves. Integrated
Hydraulics 1CE30 Series - To 5000 PSI & 8 GPM. Integrated
Hydraulics 1CE30 Series 1CE30F35S10
Manufacturer = EATON VICKERS; Description = Counterbalance
Valves (Overcenter Valves), Cartridge Type, Integrated
Hydraulics 1CE30 Series, 5075 PSI, 8 GPM; Features = The
1CE30 is a 3 port, externally piloted, screw-in
cartridge-type counterbalance (overcenter) valve. Requires a
machined A6610 cavity or housing for installation.;
Application = To control moving loads and prevent load
runaway, giving load holding and hose failure safety.; Pilot
Ratios = 2.5:1 - Best suited for extremely unstable
applications such as long booms or flexible frameworks. 5:1
- (standard) Best suited for applications where load varies
and machine structure can induce instability. 10:1 - Best
suited for applications where the load remains relatively
constant.; Specifications = 8 gpm rated flow. 4000 psi max
load induced pressure, 5000 psi max relief pressure.
CAUTION: Pressures over 3000 psi require a steel housing.;
Operating Temperature Range = -22? to +194?F; Maximum
Internal Leakage = 5 drops per minute (based on oil
temperature of 104?F and 150 SSU).; Recommended Filtration
Level = ISO level 18/13 or better.; Installation = 33 ft-lbs
torque cartridge into cavity. Unrestricted mounting
position.; Housings: Single and Dual valve housings
available.; Flow Rating (gpm) = 8; Pressure Range (psi) =
1740-5075, Factory Setting = 3045 PSI; Pilot Ratio = 10:1;
Adjustment Means = Screw with Locknut; Seal Material =
Nitrile; Notes = Single valve body (aluminum) with SAE-6
ports is 410AA00014A; Weight (lbs.)= 0.40 |
|
Integrated Hydraulics閥門1CE30F35S2原理
