德國BURKERT柱塞閥2/2直接作用-2610型優價銷售
德國BURKERT柱塞閥2/2直接作用 2610閥是一種直接作用的介質分離柱塞閥。通過不銹鋼波紋管對線圈和外殼進行熱密封隔離，可實現介質溫度和侵蝕性介質。線圈由耐化學腐蝕的環氧樹脂模制而成。因此，該閥特別適用于關鍵介質的應用。包含在供貨范圍內的'Kick and Drop'電纜的電纜插頭支持閥門打開過程，并在打開后將電流降低到保持力。結合符合DIN EN 17301-803 A型規格的插頭，該閥門符合IP65防護等級 - 與不銹鋼外殼NEMA 4X結合使用。
產品的描述可能與實際的具體設計不同。
產品照片Typ 2610
直動式介質分離閥，直徑DN12
焊接金屬波紋管系統（316Ti）
高品質的PTFE閥座密封
介質溫度從-200°C到+180°C
節能“踢和放”電子產品
如需選擇正確的產品，請根據數據表參考技術數據，圖像和注意事項以便正確使用。
德國BURKERT柱塞閥2/2直接作用-2610型優價銷售

Type 2610 - Plunger valve 2/2 way direct-acting

facebookgoogle plustwitter

The depiction of the products may differ from the actual specific design.

Type Description

The 2610 valve is a direct-acting, media-separated plunger valve. Thermal and hermetic isolation of coil and housing by means of a stainless steel bellows enables both extreme media temperatures and aggressive media. The coils are moulded with chemically resistant epoxy. Therefore, the valve is especially well suited for applications with critical media. The cable plug with 'Kick and Drop' electronics included in the scope of supply supports the valve opening process and reduces current to the holding power after opening. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65 – in combination with the stainless steel housing NEMA 4X.

• Direct-acting, media-separated valve with diameter of up to DN 12
• Welded metal bellows system (316Ti)
• High-quality PTFE seat seal
• Media temperature from -200 °C to +180 °C
• Energy-saving 'Kick and Drop' electronics

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

德國BURKERT柱塞閥2/2直接作用-2610型優價銷售